Filter
Top Products
CHANGING THE UV BULB (CONT’D.)
CHANGING THE UV BULB
CLEANING
Step 1 Step 2 Step 3
Step 1 Step 2 Step 3
Step 5
Step 3 Step 4
CHANGING YOUR FILTER (CONT’D.)
Step 4
To change the filter:
Step 4
Step 5 Step 6
Unscrew old bulb and
replace with new one.
Replace door and
screws and reassemble
unit.
Turn off and unplug
your humidifier.
Remove and empty the
water tank.
Remove the filter,
empty the base of
water and dry.
*
Turn base over,
locate door, and
remove screws with
Philips screwdriver.
Step 1 Step 2
Turn off and unplug
your humidifier.
Remove and empty
water tank.
Remove filter and
using undiluted vinegar,
wipe base and tank
thoroughly.
Rinse thoroughly with
water to remove
scale.
*
The UV bulb will operate for an average output of 2,000 - 3,000 hours. When the change UV bulb indicator
light illuminates on the control ring on front of the unit it is time to change your UV bulb. To purchase a
replacement UV bulb contact 1-800-477-0457 or consumerrelations@kaz.com.
NOTE: Discard the old UV bulb cartridge at a household hazardous waste collection site. Bulb and
bulb housing are not intended for use with any other product or purpose.
Lamp contains mercury. Manage in accordance with disposal laws.
See www.lamprecycle.org or call 1-800-895-8842.
Cleaning involves two steps, SCALE REMOVAL and DISINFECTING. Be sure to perform these in the
proper order to avoid harmful chemical interactions.
NOTE: REMOVE FILTER BEFORE CLEANING.
Failure to remove filter during cleaning will destroy the filter
SCALE REMOVAL
* Warning: carefully empty water
from base using the directional arrows
imprinted on the unit to be certain no
water enters it. Completely dry base
before changing UV Bulb.
Step 4 Step 1 Step 2
Turn off and unplug
your humidifier.
Remove and empty
water tank.
Remove filter and fill
water tank with 1 tsp
of bleach and 1 gallon
of cool water. Do not
overfill water tank.
Wipe base with the
same solution.
DISINFECTING
1
g
a
l
Step 3
Step 7 Step 8
Uses replacement filter
WF2.
Turn off and unplug
your humidifier.
Remove the water tank. Remove and discard
old filter.
Soak new filter in cool
water.
DO NOT wring filter. Insert new filter into
unit by gently folding
and inserting into filter
slot.
Replace the water tank.
Step 6