Kaz V3900 Humidifier User Manual


 
Step 1
Step 1
Fill tank with cool
tap water.
Replace tank cap. Tighten
by turning clockwise
.
Place tank back on
humidifier.
SETTING UP YOUR HUMIDIFIER
Placement
Soak Filter
Fill Tank
Remove tank.
Turn tank upside-down.
Remove tank cap by
turning counter-
clockwise
.
Once the filled water
tank has been placed
on the unit do not move
humidifier. Doing so could
cause leakage and spills.
SETTING UP YOUR HUMIDIFIER (CONTD.)
Output
Set fan speed to desired output:
High (
) Max Moisture
Medium (
) Everyday Moisture
Low (
) Night time sound sleep mode
Step 1 Step 2 Step 3
Power
With the power switch in the OFF position, plug the filled
humidifier into a polarized 120V outlet. DO NOT FORCE
THE POLARIZED PLUG INTO THE OUTLET; it will only fit
one way.
DO NOT plug in humidifier with wet hands to avoid
electric shock.
Step 1
Scent Pad
Remove tank and locate
Scent Pad slot.
Step 1
OPERATING YOUR HUMIDIFIER
Open Scent Pad bag and
remove old pad.
Install new Scent Pad into
humidifier.
Step 2 Step 3
WARNING: As long as your humidifier is on, the scent pad heater will also be
activated. This area can be warm to the touch.
NOTE: One complementary scent pad is included with your unit, replace with Vicks
Scent Pads, models VSP-19/VSP19-CAN or Vicks Sleepy Time Vapopad VBR-5, available
at most retailers or through Kaz Consumer Relations or www.kaz.com.
CHANGING YOUR FILTER
NOTE: It is recommended that all maintenance be done in the kitchen or bathroom on a water
resistant surface. Remove water tank from unit before moving.
The filter should be changed every 1-3 months depending on your water quality. Keep in mind, depending
on your water quality, mineral deposits can still clog or discolor the filter, affecting its life and that of the
humidifier.
Step 1
Step 2
Select a firm, level location at least 6” (15cm) from
any walls for proper airflow. Place the humidifier on a
water-resistant surface, as water can damage furniture
and some flooring.
Step 3
Soak the filter in cool water.
DO NOT wring filter.
Insert new filter into unit
by gently folding and
inserting into filter slot.
Kaz will not accept responsibility for property damage caused by water spillage.