Filter
Top Products
9
4. Line up the bracket screw with
the screw hole in the base of the
heater, and secure.
Fig. 5
Fig. 6
5. Turn the heater upright so that
the wheels are holding up the
heating unit.
Wall Mounting Instructions
Please ensure your wall is capable
of holding the weight of this heater
and that the right screws are used for
your wall.
This unit can be mounted on any wall
in most rooms of the home (except in
the immediate surroundings of a bath,
a shower or a swimming pool). When
selecting a location, decide upon a
position that takes advantage of the
maximum volume of air flow.
CAUTION: Before
mounting the heater to
the wall, please ensure
that both attachment
points are secure in either
timber or concrete. Do
NOT secure directly into
plaster. Please contact
a tradesman if you are
unsure. Please see Fig.
7. which illustrates the
points of contact. Ensure
that the heater is at least
0.5 metres from the floor
and corners of the wall.
NOTE: Ensure the feet are
removed from the unit before
wall mounting the heater.
NOTE: The heater comes with
two sets of screws and wall
mounting brackets which can
be found in the bracket pack
and on the back of the heater.
1. Locate the brackets at the back
of the heater. The bracket is
located at the top of the heater
in the centre as per fig 7.
Fig. 7
KMH100_IB_A11_FA.indd 9 14/09/11 1:58 PM