Kambrook KMH100 Electric Heater User Manual


 
7
Quick Start Guide
Hints/Tips to Retain Heat in
Your Home
• Don’t overheat your home. The
temperature of a heated room in winter
should be 18-21°C
• Your heater will work more efficiently if
you stick to Kambrook’s recommended
clearance spaces
• Choose the right size heater for the room
type you want to heat
• Zone off unoccupied rooms by closing
doors and only heat the main living areas
• Fit window coverings like curtains to limit
winter heat loss
• Put draft stoppers, such as a rolled
up towel, at the bottom of outside
doorways to keep out cold air
• Keep the heat in and the
cold out by installing wall and ceiling
insulation
• Avoid placing items too close to the
heater at the front (and back if it is for
floor use) for optimal air flow
Turning the
heater on after
assembly
Turning the
heater off
Setting the
heating mode
Setting the
variable
temperature
Turn the heat
setting dial to the
off position. Make
sure that the switch
on the THERMOSTAT
dial is set to MIN.
When a
comfortable room
temperature has
been reached,
turn the variable
THERMOSTAT in
an anti-clockwise
direction until a
click sound is heard,
then stop.
Plug the cord into
a 230V or 240V
power point and
switch on.
Return the heat
setting dial to the
OFF position to turn
off the heater.
Turn the heat
setting dial in a
clockwise position
to the LOW or HI
heat setting.
Turn the variable
THERMOSTAT dial in
an anti-clockwise
position to the
MAX setting.
KMH100_IB_A11_FA.indd 7 14/09/11 1:58 PM