Filter
Top Products
– 23 –
English
Screen-saver
• When a menu screen of a karaoke disc is displayed for a few
minutes without any selection being made, it automatically starts
from the first song.
Do not paused Video CD for more then 10 minutes to prevent screen
burns.
Playing Video CDs without PBC — Continuous
Play
Even if a video CD has PBC, you can cancel PBC and play
the disc without using the menu screen.
1
Turn on the TV and select the video input so that
you can view the pictures from the CD Player.
Refer to the manual supplied for your TV.
2
Prepare a CD.
Refer to “Loading Discs” on page 21.
3
Start playback of the CD.
On the unit:
Press CD 3/8 SELECT or CD 1-3 of the
tray you want to play from. The selected
video CD starts playback from the first
track if you pressed CD 1-3.
On the remote control:
Press the number button of the track you want to start
playing. The playback starts from the selected track of the
currently selected disc.
To stop during play, press 7.
To restore PBC, press the PBC button again, then press CD
3/8 SELECT to play VCD with PBC.
Cancelling PBC
• After cancelling PBC, you can Continuously Play more than one
video CD without PBC.
• When PBC is cancelled, some images such as still play pictures
may not be played back.
• You cannot change from PBC OFF to PBC ON while CD is
playing.
Resuming Play
If you stop a video CD directly, you can continue viewing
from the scene where you last stopped.
1
During playing of a VCD, press 7 button to stop
playing (refer to page 21).
2
Press CD 3/8 SELECT button to continue playback
from the last scene that you stopped at.
1 Resume play will not work when the CD tray has been opened.
2 It is advisable to turn off PBC to use resume play otherwise it will
resume at PBC menu.
3 Resume Play will not function on VCD version 1.1.
Special Plays for a Video CD
You can use the following special play modes for video CDs
both with and without PBC. The following functions can only
be executed with the buttons on the remote control.
Frame-by-Frame Playback
Press the STILL button during playback. Then each
time you press the button, still pictures advance by
one frame. During frame-by-frame playback, no
sound is emitted.
To resume normal playback, press CD 3/8 SELECT.
Viewing Operating Status
Usually, the following information of the track being played
is shown on the TV screen during playback : the disc number,
the track number, and the playing time.
Press ON SCREEN.
This button shows the display of operation status.
When the display of operation status turns on, the
following information of the track being played
appear on the TV screen: Disc number, track number/
total number of tracks and the current tracks elapsed time.
Continued
CD3
CD2
CD1
To cancel the display of operation status, press ON SCREEN.
Viewing the Video Intro of the Video CD
You can view the contents of a video CD, watching for about 7
seconds of each track on the video CD. Video intro does not
work with PBC. For a video CD with PBC, cancel the PBC
function referring to “Playing Video CDs without PBC” above.
1
Press CD 1-3, to select the disc you
want to view the video intro.
Playback starts.
D3 01/20 2:31
CD3
CD2
CD1
Disc Number
Track number/total number of track
Current tracks elapsed time
EN14-25.CA-HXZ7/9V[US,UN,UX]/1 22/1/03, 4:50 PM23