Filter
Top Products
341426-BIM-A-0108
Johnson Controls Unitary Products 11
FIGURE 7 - UNIT DIMENSIONS - FRONT
All dimensions are in inches.
They are subject to change with-
out notice. Certified dimensions
will be provided upon request.
TABLE 9: UNIT DIMENSIONS FRONT
UNIT SIZE
DIMENSION
“A” “B”
036 and 042 33-1/2 18-1/4
048 and 060 41-1/2 23-1/8
TABLE 10: UNIT MINIMUM CLEARANCES
1
2
1.
A 1” clearance must be provided between any combustible
material and the supply 7 air ductwork.
2.
The products of combustion must not be allowed to accumulate
within a confined space and recirculate.
CLEARANCES
FRONT 36”
BACK 0”
LEFT SIDE (Filter-Access) 24”
RIGHT SIDE 12”
BELOW UNIT
3
3.
Units may be installed on combustible floors made from wood
or class A, B, or C roof covering material.
0”
ABOVE UNIT
4
4.
Units must be installed outdoors. Overhanging structures or
shrubs should not obstruct condenser air discharge outlet.
36” (For Condenser Air Discharge