Operation
5
Some features of the Refresh Personal Hygiene System™ are designed to function only when the seat is occupied.
Using the Refresh Remote Control
Adjusting Seat, Water, and Dryer Temperature
Warm Water Washing
Sit on the seat and press the FRONT or BACK (either HIM or HER) button to begin water
flow. Press STOP button to discontinue water flow.
Water Flow/Pressure Adjustment
While water is flowing, press the button to increase pressure or the
button to decrease pressure. Repeat until desired pressure is reached. There
are five (5) levels of water pressure. Each wider bar on the LCD graphic
display represents one level increase.
Pulsating Water Mode
To change to Pulsating Mode; While water is flowing, press the FRONT or BACK (either HIM or HER) button for over
three (3) seconds. To deactivate and return to normal washing mode, repeat the above step.
Warm Air Dryer
Press the WARM AIR button to start dryer. Press STOP to stop the dryer.
LCD Panel
Adjusting Seat Temperature
Press SEAT TEMP button to adjust temperature. Repeat until desired level is achieved. There are
four (4) temperature levels: low>medium>high>off. Each wider bar on the LCD graphic display
represents one level increase. No LCD graphic indicates seat heating is OFF.
Adjusting Water Temperature
Press WATER TEMP button to adjust temperature. Repeat until desired level is achieved. There are
four (4) temperature levels: low>medium>high>off. Each wider bar on the LCD graphic display
represents one level increase. No LCD graphic indicates water heating is OFF.
Adjusting Dryer Temperature
Press WARM AIR button to adjust temperature. Repeat until desired level is achieved. There are three
(3) temperature levels: low>medium>high. Each wider bar on the LCD graphic display represents
one level increase.
You must be sitting on the seat for these functions. The last entered temperature settings are stored in memory.
AUXILIARY CONTROLS
(backup for Remote)
AUX Stop
AUX Wash
REMOTE CONTROL PANEL
WARM WATER WASH
Posterior (Rear)
Cleansing
Feminine (Vaginal)
Cleansing
Water Temperature
Low>Med>High>Off
Seat Temperature
Low>Med>High>Off
Warm Air Dryer
On
Low>Med>High
Water Pressure
Adjustment
Decrease Increase
Stop
(for Wash and Dryer)
Powersave
Function
LCD Panel
INDICATOR LIGHTS
power
power save
seat heat
seat sensor
View of
LCD Panel
EX93000 Refresh Installation Manual 10/06