Maintenance
7
12
34
5
6
1
2
3
4
5
6
T-VALVE FILTER:
BIDET-HOSE FILTER:
1) Turn water supply valve OFF
completely.
2) Flush toilet to empty the water
tank. (Failure to do so could result
in leaking or flooding!)
3) Unscrew the filter from the T-Valve.
(the end not connected to a hose)
4) Gently brush and clean the filter
with water to remove build-up.
5) Reconnect the filter to the T-Valve.
6) Turn the water supply back ON
and check for leaks.
1) Turn water supply valve OFF
completely.
2) Flush toilet to empty the water
tank. (Failure to do so could result
in leaking or flooding!)
3) Disconnect the Bidet Hose from
the Refresh.
4) Gently brush and clean the filter
with water to remove build-up.
5) Reconnect the Bidet Hose to the
Refresh.
6) Turn the water supply back ON
and check for leaks.
CAUTION CAUTION
Always unplug the Refresh before cleaning!
Seat Cleaning and Removal
Nozzle Cleaning
Filter Cleaning
Use a soft, damp cloth and mild cleanser (such as
dish soap) to wipe down the seat. DO NOT scrub
or use harsh, abrasive products to clean the Refresh
bidet seat.
For a more thorough cleaning, you may remove
the Refresh bidet seat. To release, push the button
located on the back right side of the seat and pull
the Refresh bidet seat forward.
It is recommended that you clean the retractable nozzles monthly or as necessary.
To clean the nozzles, pull them out gently and use a soft, damp brush or cloth to
wipe down. DO NOT use soap or detergents to clean nozzles.
For proper Refresh bidet seat function, it is important to occasionally clean the water filter. Frequency
of cleaning depends on your local water supply. Clogged filters cause decreased water flow, affecting
operation. Remove filters by hand. DO NOT operate with filters removed.
Press to
Release
For other issues or questions, contact Jacuzzi Customer Service:
1-800-288-4002
Contact Information Warranty
Jacuzzi Whirlpool Bath
Customer Service
14801 Quorum Dr., Suite 400
Dallas, TX 75254
PHONE: 1-800-288-4002
WEB: www.jacuzzi.com
The Refresh Personal Hygiene System™ is covered by
a limited one year warranty, valid from the original
date of purchase for original purchaser.
Please complete and return the enclosed product
registration card to receive important product
updates.
EX93000 Refresh Installation Manual 10/06