Filter
Top Products
17
ESPRESSO FINISH CLOSED CABINET TV STAND
www.insigniaproducts.com
Step 13
:
Adjusting the doors
Refer to the enlarged diagram to identify the parts on the hinges.
The doors may need some adjustments. Follow the text below to make needed adjustments.
DOOR ADJUSTMENTS:
• To adjust the doors from side to side (horizontal), loosen the horizontal adjustment screws several turns, then
turn the adjusting screw in or out. Tighten the mounting screw after making adjustments.
• To adjust the doors up and down (vertical), loosen both sets of vertical adjustment screws. Move the doors up or
down to the desired location. Tighten the screws after making adjustments.
• To adjust the doors in or out (depth), loosen the mounting screws one turn and move the doors in or out, as
needed. Tighten the mounting screws after making adjustments.
Mounting screw (depth)
Vertical adjustment screw
Horizontal
adjustment screw
You’ll need:
Phillips screwdriver
NS-WD1450_NS-WD1450-C_14-0647_MAN_V3_ENG.fm Page 17 Tuesday, June 24, 2014 12:19 PM