Filter
Top Products
16
ESPRESSO FINISH CLOSED CABINET TV STAND
www.insigniaproducts.com
Step 12
:
Attaching the doors
1 Carefully stand your unit upright.
2 Fasten two hinges (Z) to each door (I). Use four black 1/2” flat head screws (JJ) on each door.
3 Fasten the first door (I) to the right end (A) and the second door (I) to the left end (B). Use the screws in the
hinges.
a. Loosen the mounting screw on both hinges, then slide the hinge apart.
b. Tighten the vertical adjusting screws on the hinge plates partway into the right end (A).
c. Slide the hinges back together by aligning the door (I) with right end (A) then tighten the vertical
adjustment screws and mounting screws.
d. Repeat steps a-c for to attach the second door (I) to the left end (B).
4 Fasten a knob (AA) to each door (I). Use the gold 1” machine screws (HH).
5 Stick two felt disks (BB) on each door (I) where it comes in contact with the uprights (C or D).
I
Z
I
A
AA
BB
C
HH
3a
3c
Horizontal
adjustment screw
Mounting
screw
(depth)
Vertical adjustment
screw
Hinge plate
You’ll need:
JJ (8)
HH (2)
BB (4)
Z (4)
AA (2)
Phillips screwdriver
NS-WD1450_NS-WD1450-C_14-0647_MAN_V3_ENG.fm Page 16 Tuesday, June 24, 2014 12:19 PM