Filter
Top Products
22
3-in-1 TV STAND
www.insigniaproducts.com
SWIVEL STAND ASSEMBLY INSTRUCTIONS
Step 1: Align and attach the long rear support
1 Insert four 2¼" bolts (W) through the lock washers (X) and the flat washers (Y) through the drilled holes on the
long rear support (D).
2 Securely screw into the threaded holes of the side frames (A and B). Make sure that the sockets for the cable
clips face backward.
Sockets for cable clips
face backward.
You’ll need:
W (4)
X (4)
Y (4)
EE (1)
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 22 Wednesday, May 7, 2014 1:33 PM