Filter
Top Products
9
3-in-1 TV STAND
www.insigniaproducts.com
Step 3
: Align and attach the front stringers (F, H, and J) to the front of the side frames (A and B)
1 Insert two 1 5/8” bolts (V) through the lock washers (X) and flat washers (Y) through the drilled holes on the top
rail of the side frames (A and B) and securely screw into the threaded holes of the top stringer (F).
2 Repeat the same procedure to attach the middle stringer (H) to the middle rail of the side frames (A and B).
3 Insert two 2¼” bolts (W) through the lock washers (X) and flat washers (Y) through the drilled holes on the
bottom rail of the side frames (A and B) and securely screw into the threaded holes of the bottom stringer (J).
You’ll need:
V (4)
W (2)
X (6) Y (6)
EE (1)
NS-3IN1MT50C-NS-3IN1MT50C-C_14-0478_MAN_V2_ENG.fm Page 9 Wednesday, May 7, 2014 1:33 PM