Filter
Top Products
Page 2
12.0 User setup 12
12.1 Peak hold (gauge) 12
12.2 Peakhold (screen) 12
12.3 Display units 12
13.0 Desen Factor 1 13
13.1 Desen Factor 2 13
13.2 Standby mode 13
14.0 Standby delay 13
14.1 RS232 Protocol 13
14.2 Sound type 14
14.3 Sound begins at 14
14.4 Live tick 14
14.5 Filter threashold 14
14.6 Filter count 14
15.0 Tech data readout 14
15.1 Probe/Sensor/Filter life 15
15.2 Changing the Probe 15
16.0 Known problems. 15
16.1 Power Up During Transport. 15
16.2 Power Up after fuse has been removed 15
16.3 Pre set passwords on delivery 15
16.4 Settings on despatch 16
16.5 Citizen printer 16
16.6 Spares and consummables 16
3.0 GENERAL:
This manual is addressed to those responsible for and using this instrument and applies
to software version V1.37BB
3.1 SAFETY:
Please read this paragraph carefully before operating the instrument.
Do not open any part of the instrument, there are no user-serviceable parts inside.
Protect from moisture and water. Use in dry conditions.
Use only to leak test on voltage-free and grounded switchgear.
Touching a finger gently to the screen surface operates the touch screen.
DO NOT USE TOOLS TO TOUCH THE SCREEN.