Innovation Technology SF6 Smoke Alarm User Manual


 
Page 1
Contents: Software version V1.39BB
Subject Description Page
3.0 General 2
3.1 Safety 2
4.0 System Properties/introduction 3
4.1 Console controls 3
5.0 Handgun displays and controls 4
5.1 Handgun analogue display 4
5.2 Handgun display LED’s 4
6.0 Handgun buttons 5
6.1 Top Caps 5
6.2 Filters 5
7.0 Getting started 6
7.1 Measuring operation 6
7.2 Possible fault conditions during operation 6
7.3 Low flow error 7
7.4 Flare stall 7
7.3 Low battery voltage 7
7.5 Switching OFF 7
8.0 Switching OFF in case of fault 7
8.1 User setup 8
8.2 Set volume/Contrast 8
9.0 Open Operator Level 8
9.1 Operator ID 8
9.2 Data printout 9
9.3 Clear data memory 9
9.4 Open Supervisor Level 9
9.5 Set alarm levels 9
9.6 Operator ID mode 9
10.0 Do not force operator ID 9
10.1 Force operator ID by name 9
10.2 Force operator ID by key code 10
10.3 Access codes 10
10.4 Changing passwords 10
10.5 Terminate and lock supervisor level 10
10.6 Open Tech level 10
11.0 Calibration 11
11.1 Set clock 11