Filter
Top Products
A-22
MDriveAC Plus Microstepping Hardware - Revision R031808
Relevant to Firmware Version 3.0.02
WARNING! Do not
plug or unplug AC
Power at the Motor
with the power on!
Note: UL
Recognition requires
the use of the
MD-CS20x-000 or Lumberg
Equivalent AC Power Cordset.
MD-CS20x-000 Cordset
The single-end three conductor cordsets are used with the MDrive
AC. Measuring 13.0' (4.0m) long, they are available in either straight
or right angle termination. Euro AC Color Code, Oil-resistant yellow
PVC jacket, IP68 and NEMA 6P rated.
Straight Termination ............................MD-CS200-000
Right Angle Termination .....................MD-CS201-000
Euro AC Cordset
Euro AC Euro Cordset Color Code
Pin 1 Yellow/Green
Pin 2 Brown
Pin 3 Blue
Table C.2: Euro AC Wire Color Chart
Figure C.14: MD-CS20x-000
MD-CS200-000
MD-CS201-000
13’ (4.0 m)
2.54” (64.5 mm)
1.70”
(43.3 mm)
Pin 1
Pin 3
Pin 2
3-Pin Euro AC Connector
Ensure Adequate Space is available inside your
enclosure to allow for the cordset connector!