Hustler Turf M1 Furnace User Manual


 
108548_0711 1-1
GENERAL INFORMATION
This manual applies to the following Hustler equipment
lines:
M-1 WalkBehind
To the new owner
The purpose of this manual is to assist owners and operators
in maintaining and operating the M-1 WalkBehind mower.
Please read it carefully; information and instructions furnished
can help you achieve years of dependable performance.
A separate Engine Owner’s Manual is included with your
owner’s packet which contains additional engine information
that will not be repeated in this manual. You are urged to read it
before attempting any operation or repair of the engine.
It is the owner’s responsibility to make certain that the
operators and mechanics read and understand this manual and
all decals before operating this machine. It is also the owner’s
responsibility to make certain that the operators and mechanics
are qualified and physically able individuals, properly trained in
the operation of this equipment. All operators and mechanics
must become familiar with the safe operation of the equipment,
operator controls and safety signs.
Never let children or untrained people operate or service the
equipment. Local regulations may restrict the age of the
operator.
The owner/user can prevent and is responsible for accidents or
injuries occurring to themselves, other people or property.
Using this manual
General operation, adjustment and maintenance guidance is
outlined for both the experienced and novice Hustler user.
Operating conditions vary considerably and cannot all be
addressed individually. Through experience, however, operators
should find no difficulty in developing good operating skills
suitable to most conditions.
Directions used in this manual, for example RIGHT or LEFT,
refer to directions when standing behind the mower facing
forward, unless otherwise stated.
Photographs and illustrations used were current at the time of
printing, but subsequent production changes may cause your
machine to vary slightly in detail. Hustler Turf Equipment
reserves the right to redesign and change the machine as deemed
necessary, without notification. If a change has been made to
your machine which is not reflected in this owner’s manual or
the parts list section of this manual, see your Hustler dealer for
current information and parts.
Warranty registration
The Delivery and Warranty Registration form must be
completed and signed to validate your warranty protection. As
the new equipment owner, you are expected to see that the form
is completed and forwarded to Hustler Turf Equipment at time
of delivery.
Be sure to register this mower with Hustler Turf Equipment.
IMPORTANT: Any unauthorized modification, alteration,
or use of non-approved attachments voids the warranty and
releases Hustler Turf Equipment from any liability arising from
subsequent use of this equipment.
IMPORTANT: Contact Hustler Turf Equipment for proper
operation and installation of accessories. Only use accessories
approved by Hustler Turf Equipment.
Model and serial number
Mower model and serial numbers are found on the serial
identification plate, located on the top right rear of the mower
housing.
These numbers are required on the Warranty Registration
form. They will also assure you of the correct service parts when
replacement becomes necessary.
Parts and service
Use original Hustler replacement parts only. These parts are
available through your local Hustler dealer. To obtain prompt,
efficient service, always provide the following information
when ordering parts:
1. Correct part description.
2. Correct model number.
3. Correct serial number.
All warranty repair and service must be handled through an
authorized Hustler dealer. Arrangements should be made
through your local service center.