Filter
Top Products
34
MAINTENANCE
Caution: Always make sure the machine is
unplugged from the power source and the main
switch is on “O” before inserting or removing any
parts and before cleaning.
Remove the stitch plate:
Turn the handwheel until the needle is fully raised.
Open the hinged front cover and unscrew the needle
plate screw with the screw driver. (1)
Cleaning the feed dog:
Remove the bobbin case and use the brush supplied to
clean the whole area. (2)
Cleaning and lubricating the hook:
Remove the bobbin case. Snap the two hook retaining
arms (a) outwards. Remove the hook race cover (b)
and the hook (c) and clean with a soft cloth. Lubricate
at the points (d) (1-2 drops) with sewing machine oil.
Turn the handwheel until the hook race (e) is in the
left position. Replace the hook (c). Replace the hook
race cover and snap back the two hook retaining arms.
Insert he bobbin case and bobbin and replace the stitch
plate.
Important: Fabric fl uff and threads must be removed
regularly. Your machine should be serviced at regular
intervals at one of our service agencies.