Filter
Top Products
15
THREADING THE UPPER THREAD
Caution: Before threading,
turn power switch to “O”.
Raise the needle bar to its
highest position. Follow
exactly the numbered
threading sequence
illustrated below. If you skip
a step or fail to properly
engage the thread in
any of the thread guides,
the machine will not sew
properly. (1-5)
1. Place spool on spool pin
with felt underneath.
2. Bring thread to the left
behind and around fi rst
thread guide.
3. Bring the thread down
into the right slot, under the
guide and up in left slot.
4. Bring thread over and
forward into the take-up lever.
5. Slide thread into wire guide above the needle.
6. Thread the needle from front to back. Leave about 10 cm
(4”) of thread loose behind the needle. (6)
Bring the thread under the presser foot and up into the
thread cutter.
a. Spool pin felt