Husqvarna C10 Sewing Machine User Manual


 
48
DARNING STITCH
1. Baste the upper fabric and the under
fabric together.
Select pattern 29 to get the darning stitch.
Change the presser foot to the buttonhole
foot.
2. Lower the presser foot over the center of
the tear.
3. Pull the button holder to rear. Set the
button guide plate on buttonhole foot to
the desired length of the darning stitch.
4. The size of one darning stitch is variable.
However, the maximum stitch length is
2.6cm (1 inch) and the maximum stitch
width is 7mm (9/32 inch).
a. The length of sewing.
b. The width of sewing.