Filter
Top Products
46
Making a corded buttonhole on stretch fabrics
1. Attach the buttonhole foot and hook the
gimp thread onto the back of the presser
foot. Bring the two gimp thread ends to the
front of the foot and insert them into the
grooves, then temporarily tie them there.
Lower the presser foot and start sewing.
Set the stitch width to match the diameter
of the gimp thread.
2. Once sewing is completed, pull the gimp
thread gently to remove any slack, then
trim off any excess.
Please Note: It is suggested that you use interfacing on the wrong side of the fabric.