Husqvarna C10 Sewing Machine User Manual


 
21
6. When the bobbin winder spindle is pushed to the right,
“bobbin winding position”, the symbol “
“ is shown
on the LCD screen.
It will disappear from the LCD screen when the bobbin
winder spindle is push to the left, “sewing position”.
7. Hold the thread tail securely in one hand.
8. Press on the foot control to start the sewing machine.
9. After the bobbin has wound a few turns stop the
machine and cut the thread near the hole of the
bobbin. Continue lling the bobbin until it is full. The
motor stops automatically when the bobbin is full. Stop
the machine. Push the bobbin winder spindle to left.
10. Cut the thread and then remove the bobbin.
Please Note: When the bobbin winder switch is pushed to the right, “bobbin winding
position”, the machine will not sew and the handwheel will not turn. To start sewing, push
the bobbin winder switch to the left “sewing position”.