Hunter Fan 44428 Thermostat User Manual


 
Resets all usage digits to zero.
MO TU WE TH FR SA SU LOW BATT
PROG# 1 2 3 4 SET TEMP HOLD ROOMTEMP
EMERG AUX HEAT COOL USAGEDELAY AUTO-RECOVERY
PM
I0
:
00 00
AM
UNTIL
NEXT
PROG
AUX
USAGE
To display total auxiliary heat usage since the last time auxiliary
heat usage was reset.
Program number will appear. HOLD will disappear if you were in
constant manual override.
Returns to normal time and temperature.
Auto-return after 15 seconds if no key is pressed.
Press USAGE REVIEW to display the amount of time the system has
run today (Wednesday, since 12:01 AM). For example, 3 hours and
21 minutes. (If held for more than 2 seconds the counter will reset
to zero.)
Your thermostat has two energy Monitors: 1. USAGE: Measures total usage of
air conditioning and heating (including Auxiliary Heating) systems. The usage
can be displayed for present day (as of 12:01AM) and the previous day (as of
12:01AM through midnight). 2. AUXILIARY USAGE: Measures cumulative
14
Press again to display the amount of time the system ran
yesterday (Tuesday, 12:01 AM through midnight).
Using the Energy Monitor Usage Review
To Return To Program From Manual Override
Normal display of time and temperature.
Returns to normal time and temperature.
Auto-return after 15 seconds if no key is pressed.
usage of auxiliary heat, up to 999 hours and 59 minutes. By monitoring your
energy usage, you see how much the set-back periods are saving for you and you
can test program adjustments which could save you even more. Use the table on
page 16. Both of the energy monitor counters can be reset at any time.
To reset the Energy Monitor’s usage counter back to zero:
Press and
Hold for 3-
4 Seconds
Press Once in
Constant Override
Mode and Twice in
Temporary Override Mode.
Press For
2 Seconds
Or Less
MO TU WE TH FR SA SU LOW BATT
PROG#1 2 3 4 SET TEMP HOLD ROOMTEMP
EMERGAUX HEAT COOL USAGE DELAY AUTO-RECOVERY
PM
I9
:
!5 55
AM
UNTIL
NEXT
PROG
MO TU WE TH FR SA SU LOW BATT
PROG#1 2 3 4 SET TEMP HOLD ROOMTEMP
EMERGAUX HEAT COOL USAGE DELAY AUTO-RECOVERY
PM
I5
:
00 68
AM
UNTIL
NEXT
PROG
MO TU WE TH FR SA SU LOW BATT
PROG# 1 2 3 4 SET TEMP HOLD ROOMTEMP
EMERG AUX HEAT COOL USAGEDELAY AUTO-RECOVERY
PM
I5
:
03 2!
AM
UNTIL
NEXT
PROG
HOLD
CLEAR
AUX
USAGE
RETUR
N
USAGE
MO TU WE TH FR SA SU LOW BATT
PROG# 1 2 3 4 SET TEMP HOLD ROOMTEMP
EMERG AUX HEAT COOL USAGEDELAY AUTO-RECOVERY
PM
I5
:
08 42
AM
UNTIL
NEXT
PROG
USAGE
MO TU WE TH FR SA SU LOW BATT
PROG#1 2 3 4 SET TEMP HOLD ROOMTEMP
EMERGAUX HEAT COOL USAGE DELAY AUTO-RECOVERY
PM
I5
:
00 68
AM
UNTIL
NEXT
PROG
MO TU WE TH FR SA SU LOW BATT
PROG# 1 2 3 4 SET TEMP HOLD ROOMTEMP
EMERG AUX HEAT COOL USAGEDELAY AUTO-RECOVERY
PM
I2
:
40 !2
AM
UNTIL
NEXT
PROG
MO TU WE TH FR SA SU LOW BATT
PROG#1 2 3 4 SET TEMP HOLD ROOMTEMP
EMERGAUX HEAT COOL USAGE DELAY AUTO-RECOVERY
PM
I5
:
00 68
AM
UNTIL
NEXT
PROG
RETUR
N
USAGE
or
71
.
70
72
.
Operations