Filter
Top Products
42729-01 12/20/2006 9
ENGLISH
20. Align the three keyhole slots in
the Back Grille with the three re-
maining Grille Mounting Screws
in the Motor Face, and place the
Back Grille onto the Motor Face,
ensuring that the Grille Mount-
ing Screw washers are between
the screw head and the Back
Grille. If necessary, loosen the
three remaining Grille Mounting
Screws. See Figure 7.
21. Rotate the Back Grille clockwise
to situate the screws in the nar-
row ends of the keyhole slots.
22. Reinstall and tighten the Up
-
per Left Grille Mounting Screw
and tighten the remaing three
remaining Grille Mounting
Screws.
FIGURE 7
Blade
Assembly
Sleeve
Blade
Assembly
Setscrew
FIGURE 8
23. Loosen the Blade Assembly
Setscrew so that it does not
protrude into the inside of the
Blade Assembly Sleeve. See Fig-
ure 8.