Filter
Top Products
42729-01 12/20/2006 11
ENGLISH
operatIon
Angle
Adjustment
Knob
This appliance is for household use
only.
1. Place the fan on a dry, safe, flat
surface where it cannot fall or
be pulled by the cord.
2.
The Power/Speed Control
should always be OFF before
plugging or unplugging the fan.
Plug the fan into a grounded
120-volt AC electrical outlet
(ordinary household current).
DO NOT use any other type of
outlet. Make sure that the rated
voltage of the fan is the same as
the power source before plug-
ging it into the power source.
3.
Use the Power/Speed Control
to turn the fan “ON” or “OFF”.
See Figure 13.
4. To select the speed, move the
Power/Speed Control from OFF
to the desired speed setting:
O (off), I (low), II (medium), III
(High). See Figure 13.
FIGURE 13
Power/Speed
Control
Oscillation Pin
27. Place the Grille Ring over the
Front and Back Grille rims, po-
sitioning the opening of the
Grille Ring at the bottom of the
Front and Back Grille rims. Bring
the two ends of the Grille Ring
together, and secure them with
Grille Ring Latch. See Figure 12.