Filter
Top Products
5
Read This Before Installing Thermostat
IMPORTANT
1
Read the entire installation section of this Owner’s
Manual thoroughly before you begin to install or oper-
ate your Hunter Thermostat.
Remove the Mylar label from the LCD display window.
INSTALLATION
2
All installation is normally performed at your
thermostat.
ARMCHAIR PROGRAMMING
3
You can program your thermostat before installation by
inserting the batteries and following the instructions
starting on page 16. This can be done while you relax in
your favorite chair and is a very good way to familiarize
yourself with all the functions of your Hunter Thermostat.
SYSTEM COMPATIBILITY
4
Your Thermostat is designed to operate with most
gas, oil, electric, or 2-wire hot water heating and air
conditioning systems. It will also operate single-stage heat
pumps that do not have auxiliary or emergency heat. These
have 24 volt or millivolt control systems and represent
most central heating, air conditioning, or space heating
units in the United States.
This thermostat will not control 120/240 Volt systems or
millivolt systems.
COMPRESSOR PROTECTION
5
The thermostat provides a 3.5 minute delay after shut-
ting o the heating or cooling system before it can be
restarted. This feature will prevent damage to your com-
pressor caused by rapid cycling.