Filter
Top Products
_!
Holding dirt cup over trash recepta-
cle, press dirt cup door release but-
ton (C) to open dirt cup door (D),
Close door and press dirt cup door
release button to latch dirt cup door
closed,
Place bottom of dirt cup into cleaner
body first, Pivot cup into cleaner
body,
1<_,1
Press on dirt cup release button
while firmly pressing on dirt cup,
Release button in order for it to
return to proper position and lock
the dirt cup into place,
Cleaning filters
Cyclonic filter assembly
How to clean
Disconnect cleaner from electrical out-
let. Do not use cleaner without dirt cup
or filters in place.
Remove dirt cup as described in Fig, 3-2,
Twist filter assembly (A) counterclock-
wise, Remove assembly from dirt cup,
_A
\B
f
Dirt and debris can be cleaned from
the filter assembly by brushing with
the cleaner's combination tool,
Place the filter assembly on the dirt
cup, aligning (3) tabs (A) on filter
with (3) slots on dirt cup (B) and
twist it clockwise to secure into
position, Press dirt cup door release
button (C) to latch dirt cup door
closed,
Replace dirt cup as described in
Figs, 3-4 & 3-5,
Secondary filter
How to clean
Disconnect cleaner from electrical
outlet. Do not operate cleaner
without dirt cup or filters in place.
Remove dirt cup as described in
Fig, 3-2,
With thumb, slide latch (A) located
at the top of the housing to the right
and pull down to remove gray filter
frame, Remove black foam filter,
Rinse filter frame cartridge and foam
filter under cold water,
Allow both filter frame and filter to air
dry for 24 hours before replacing fil-
ter into filter frame, Reposition filter
frame cartridge by inserting tabs (B)
into slots on back of housing, Rotate
filter cartridge frame up toward top
of housing and snap closed,
What to buy
When purchasing a new secondary
filter cartridge, ask for HOOVER
part No. 93002517. To purchase a
new black foam filter, ask for
HOOVER part No. 93002518.
Continued -_