Filter
Top Products
4
Place nut (A) in recessed area at
back of handle. Hold nut in place
while tightening bolt securely with a
screwdriver.
Note: Only one nut is needed on this
model. The extra nut is not required but
has been provided for your convenience.
13
14
B
14
13
A
On upper front handle, grasp bag
clip (B) and pull down firmly. Hook
bag clip into slot in bag cap.
Hold paper bag collar (A) as shown.
Align opening in paper bag with dirt
tube (B) inside the outer bag.
Push bag collar firmly onto (B).
Tuck in paper bag; zip outer bag.
STEP 6 Attach paper bag
16
A
A
B
16
15
C
D
15
Pull white switch lock above ON-
OFF switch straight out.
Dispose of lock.
Note: If lock has come off during
assembly, make sure switch is in the
OFF position (down) before plugging
cord into electrical outlet.
CAUTION: When the cleaner is turned
ON, the agitator continues to rotate
while the handle is in the upright
position.
17
5
9
8
7
6
10
11
12
1
17
The assembled cleaner will look like
the drawing.
1. Handle
2. ON/OFF switch
3. Cord hooks: wrap cord around hooks
for storage. The top hook can be
rotated right or left for easy cord
release
4. Bag cap
5. Outer bag
6. Stair cleaning handle:located on
lower edge of bag.
7. Handle release lever: step on
lever to lower handle to operating or
low position.
8. Cleaner body
9. Nozzle control knob: slide knob to
correct setting for height of carpet
being cleaned.
10.Furniture guard: helps prevent
cleaner from marking furniture.
11. Hood
12. Extra belt storage: open door to
store extra belt.
2
4
3
Cleaner description
How to use
Operate cleaner only at voltage
specified on data plate on bottom of
cleaner.
WARNING: electrical shcock could
occur if used outdoors or on wet
surfaces.
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. Do not change the
plug in any way.
ON-OFF Switch
To turn cleaner ON, push switch up.
To turn cleaner OFF, push switch down.
.