Filter
Top Products
It is extremely important
to read and
follow all instruction
steps in order.
A
C
1
D G
F
E
STEP 1 Unpack carton
B
Remove all parts from carton and
identify each item shown. Make
sure all parts, especially small items,
such as G, are located before
disposing of cardboard packing.
A. Upper handle
B. Lower handle
C. Cord
D. Outer bag
F. Cleaner body
G.Handle bolt and nut packet
(one extra nut included)
H. Paper bag
STEP 2 Assemble handle
2
Note: The white switch lock above the ON-OFF (A)
switch helps in the assembly of your cleaner. Assembly
can be continued if the switch lock is missing. However,
do not remove the switch lock until assembly is com-
pleted.
Align upper handle and lower
handle as shown.
Place upper (B) and lower (C) handle
parts on a flat surface, aligning rod
sections (D). With hand on sides of
handle, push parts together firmly until
they "click" and rod sections lock
together.
2
1
A
C
B
D
*Do not press against the grey rod
extending from the lower handle Fig. 3
and 4 (E). Do not push handle together
with hands on ends of sections.
STEP 3 Attach cord
3
E
"UP"
F
2
Insert large rectangular end of cord
into pocket in bottom of handle,
with side marked “UP” visible.
Make sure rectangular end is pushed into
handle as far as possible.
Slide cord protector (F) toward upper
handle (G).
3
G
"UP"
E
Assembling cleaner