Filter
Top Products
b. To wand Add a tool to the end of the wand
by fitting the button projection on the tool into
the opening on the wand. You will hear the
plastic spring latch snap and lock into place.
To release, press down on the spring latch and
remove.
4. Remove hose for floor use
When you are finished using the attachments, remove the hose.
To remove hose from cleaner, return the dial indicator to MAX position under
CARPET SUCTION, then turn hose connector counterclockwise and remove
hose.
Your cleaner is equipped with an interlock mechanism to prevent leaving the
dial indicator at the TOOL SUCTION area when cleaning carpet.
To clean tools
To clean the hose, wipe off dirt with a cloth, dampened with a liquid deter-
gent. Use a damp cloth to remove the detergent. Cleaning tools can be washed
in warm water with a detergent. Rinse and let dry before using.
Maintenance
Proper cafe of your cleaner, will insure operation
at peak performance.
Don’t pick up hard sharp objects
They may damage the hose and the throw away bag.
Take care of cord
Wind it loosely, on cover latch and knob on Suction
Control Dial, to avoid strain. Snap clip-on plug onto
cord. To remove cord, turn cover latch (See inset).
Don’t run cleaner over the cord
-
it may damage the
insulation. Never pull on the attachment cord to dis-
connect the plug from the electrical outlet. Grasp
the plug to prevent damage to the cord, plug prongs
or receptacle.
Disconnect cord from electrical outlet before at-
tempting to service cleaner in any manner.
THE BAG
THE FULL BAG INDICATOR The bag indicator,
“CHECK BAG” located on the front of the cleaner,
makes it convenient for you to know when the dis-
posable bag should be changed.
~--.
-
-
___._
.