Filter
Top Products
FIG. 1
FIG. 2
To transport
Your ‘Power Drive’ cleaner can be transported by
two methods:
1. Use the convenient carrying hand)e for carrying
your cleaner up and down stairs or when lifting the
cleaner from one surface to another. Lift it as shown
in Fig. 1.
2. To roll your cleaner from one room to another,
use the convenient button located on top of the
handle grip (Fig. 2). Press the button and slide the
handle grip up or down the handle until the button
drops flush with the handle grip. With the button
depressed, the cleaner is in the transport or neutral
position, with the drive mechanism disengaged.
While holding the button depressed, the cleaner
may be pushed to the desired location as shown in
Fig. 3. When the button is pressed in, the automatic
‘Power Drive’ gears are locked into neutral position
and the cleaner can easily be transported.
FIG. 3
-.-
-
_---~
-
_
-
--
-
Edge cleaning feature
Provides improved cleaning of carpet edges near
baseboards and solid furniture. Passages have been
added to the sides of the cleaner bottom plate to
increase air flow carrying dust from the carpet
edge to the nozzle.
From operating position, slowly guide the right side
of the cleaner parallel to the edge of the carpet.
Cleaning lightweight flexible rugs
Move the cleaner outward from the center of the
rug. To prevent the rug from clinging to the nozzle
opening, move the dial indicator toward
MIN.
As
you approach the edge of the rug, push down on
the handle lifting the nozzle completely off the
rug, Move the cleaner back to start again, lower the
nozzle and use only forward strokes.
I
5