Filter
Top Products
HELPFUL INSTRUCTIONS ON USING YOUR CLEANER
EASY TO CARRY. Your cleaner has a convenient carrying handle
located underneath the handle bail.
DON'T PICK UP HARD, SHARP OBJECTS. with the cleaner. They
may damage the belt, the moving parts, and the bag.
TAKE CARE OF THE CORD
1. Wind it loosely on cord hooks to avoid unnecessary strain.
2. Grasp the plug (not the cord) to disconnect from wall outlet as it
may cause damage to cord, plug, prongs or receptacle.
3. Don't run cleaner over cord it may damage insulation.
CLEANING YOUR ATTACHMENTS. To clean the hose wipe off dirt
with a cloth dampened with a liquid detergent. Use a damp cloth to
remove detergent. Cleaning attachments may be washed in warm water
with a detergent. Rinse and let dry before using.
CAUTION: Never turn the cleaner upside down or attempt to service
it in any manner while it is connected to the electrical outlet.
HOW TO USE YOUR CLEANER ON
LIGHTWEIGHT FLEXIBLE RUGS
Stand on one end of the rug and move cleaner toward other end.
Before reaching the other end, push down on the handle. This will
lift up the nozzle (front of cleaner) and will prevent the rug from
clinging to the cleaner. Continue to lift up the nozzle of the cleaner
when you have reached the end. Push down on the handle until tile
cleaner is completely off the rug. Move the cleaner back to start
again and lower the nozzle, using only forward strokes.
IF TROUBLE OCCURS. If the cleaner does not pick up surface dirt,
it is an indication that something is wrong. Here are some of the things
you should check before calling the service man.
1. CHECK BAG (SEE PAGES3 AND 9)
2. CHECK BELT (SEE PAGE 10)
3. CHECK AGITATOR BRUSHES (SEE PAGE 12)
4. CHECK RUG ADJUSTMENT (SEE PAGE 4)
If you need further help, call your Hoover Service Station or Hoover
Dealer.