Filter
Top Products
4 Lift out rug
agitator, remove
old belt and place
new belt in groove
of rug agitator.
5 Replace agita-
tor. On one end of
the agitator roll
there is a raised
metal platb. Make
sure that this end
is placed in
groove on side
of cleaner.
6 Place belt on
pulley. Side of
belt nearest
cleaner should
be in line with
arrow on bottom
of cleaner.
7 Replace metal
plate. Place metal
knobs on front
end of plate in
wire holders.
Check to see that
latches are push-
ed back and will
not be covered by
plate. Place plate
in position and
latch securely.