Filter
Top Products
HOW TO ATTACH OUTER
JACKET TO CLEANER
Place the two projections at the
bottom of the outer bag assembly
inside the wire loops at the back
of the cleaner. Pull the bag clip
to tile left and fit bag against
opening. When you release the
bag clip, make sure that it fits
completely over the bag lock.
Attach the spring to the support
hook, which is located on tile
handle.
HOW TO ATTACH THROW-
AWAY BAG TO CLEANER
Open the outer jacket and pull
out tube. Roll rubber bag
retainer down the tube toward
the cleaner. Slip the open end of
the throw-away bag onto tube and
push as [!ar back as possible. (Be
sure to match arrow or1 throw-away
bag with the 0 mark on the tube.)
Unroll the rubber bag retainer so
it holds bag firmly in place.
Grasp the pleats on each side of
the throw-away bag at dotted line
and pull out until entire dotted
line is visible. Place throw-
away bag inside the outer
jacket without folding and
close jacket.
After turning cleaner on, push
down on the handle until the
front of the cleaner is free
from the carpet. This insures
that the throw-away bag
is inflated.