Filter
Top Products
4
2-3 2-4
2-1
1-8
1-6 1-7
A
A
S
T
O
P
Q
R
Attach nozzle
Line up raised rib (O) on front of nozzle
with raised rib just above opening on
cleaner. Push nozzle securely into
cleaner.
Attach hose and
tool (some models)
Facing the back of the cleaner, position
hose connector (P) into holder (Q) on
right side of cleaner body making sure
latch (R) is inside holder.
Loop hose over hose hook (S) and posi-
tion tool into holder (T) on other side of
cleaner body.
2. How to use
II
O
I
ON-OFF/Speed
selector switch
Your cleaner has a one or two speed
motor.
Use the one speed model for cleaning
any type of rug or bare floor; ON = I,
OFF = 0
Use the two speed model on HIGH (II) for
cleaning rugs and carpet, or press the
switch to LOW (l) for bare floors; OFF = 0
Rug and floor
nozzle
The combination rug and floor nozzle has
been designed to do an efficient cleaning
job on both carpet and hard surface
floors.
Some models come with the standard
nozzle. Others come with the deluxe
nozzle or with the deluxe wheeled nozzle.
All nozzles have constant edge cleaning
for cleaning along baseboards or solid
furniture. Both deluxe nozzles have a
BARE FLOOR setting and a RUG setting.
To change from one setting to the other,
refer to the directions below for your
deluxe nozzle.
Deluxe nozzle
Lock brushes to clean bare floors by slid-
ing selector (A) toward BARE FLOOR.
Release brushes to clean rugs or carpet
by sliding selector toward RUG.
Deluxe wheeled
nozzle
Lock brushes to clean bare floors by
depressing selector (A) to BARE FLOOR.
Release brushes to clean rugs or carpet
by depressing selector to RUG.
Operate cleaner only at voltage speci-
fied on data plate located on back of
cleaner motor housing.
Polarized plug
To reduce the risk of electric shock, this
product has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the
plug does not fit in the outlet, reverse the
plug. If it still does not fit, contact a quali-
fied electrician to install the proper outlet.
Do not change the plug in any way.
Plug cord into electrical outlet. Your
cleaner in now ready to operate.
2-2
‘Soft Touch’ hard floor
nozzle
The hard floor nozzle has been designed
for use on hard-surface floors. It is not
recommended for use on carpeted sur-
faces.