Filter
Top Products
The deep cleaner may also be lifted by
Automatic
“shut
OW
placing a hand under the upper clean
solution tank handle as shown.
Brush speed selector
When the recovery tank (lower tank) is full
the automatic shutoff mechanism will shut
off the deep cleaner suction
(suction
will
be
noticeably
reduced).
Your
‘SteamVac’
deep cleaner has three
agitator brush settings.
HI
-
for normal cleaning of carpet and
bare floors
At that time the red float disk will rise to
the top of the recovery tank lid (E). The
deep cleaner will no longer pick up dirty
solution and the
motor
sound
will
become
noticeably
higher
in
pitch.
When
this
happens
turn
deep
cleaner
off
and
empty
recovery
tank
before
continuing use.
Check clean solution tank also; it may
LO
-
for gentle cleaning of carpets and
bare floors
OFF
-
for cleaning carpets and bare
floors when brushing is not desired.
(Such as when picking up liquid spills.
See page
IO.)
Slide selector button to the desired set-
ting before cleaning.
need to be refilled.
Brush indicator
The brush indicator will spin (F) when
the deep cleaner is turned ON and the
brushes are rotating.
If
the
indicator
does
not
spin
and
the
pattern
is
visible
(G)
when
the
deep
cleaner is turned
ON,
the
brushes
are
not
rotating.
There are three reasons why the brushes
may not be rotating:
1. Brush speed selector set on OFF (see
previous section).
2. Handle in upright position (see
“Cleaning mode indicator,” Fig. 2-3).
3. Brush indicator screen dirty.
To clean screen (H),
turn
deep
cleaner
off
and
disconnect
from
electrical
outlet.
Remove clear cover and wipe off screen
with a damp cloth. Snap cover back into
position.
The tanks
Clean
solution
tank
(upper tank)
The clean solution tank holds the clean-
ing solution that is to be dispersed onto
the surface to be cleaned.
How
to
fill
Disconnect
deep
cleaner
from
electrical
outlet.
Place deep cleaner handle in the
upright, locked position.
To remove tank, press down on handle
and pull forward.
Carry tank to a sink.
Continued
+
7