Filter
Top Products
Deep cleaner description
The assembled deep cleaner will look like the drawing.
6
17
1.
Hand
grip
14.
Recovery
tank:
holds dirty
2.
Solution
trigger:
press to
solution.
release clean solution.
15.
Hood
3.
Cord
clip:
place cord in clip
16.
Brush
speed
selector:
to keep it out of the way
slide selector to set brush
when using cleaner speed on HI, LO, or OFF.
4.
Hose
17.
Brush
indicator:
spins
5.
Hose
holders:
wrap hose when brushes are rotating.
around holders for storage.
18.
Nozzle.
6.
Cord
hooks:
wrap cord
19.
Cleaning
mode
indicator:
around hooks for storage.
choose either floor or tools
The top hook can be rotated
2O.OlVOFF
pedal
right or left for quick and
21.
Handle
release
pedal:
step
easy cord release.
on pedal to lower handle to
7.
Scrub
module
operating (floor) position;
8.
Powered
hand
tool
22.
Stair/upholstery
nozzle
9.
Carrying
handle 23.
Bare
floor
attachment
10.
Clean
solution
tank
handle
11.
Clean
solution
tank
cap/
This
deep
cleaner
is
intended
measuring
cup
for
household
use.
12.
Clean
solution
tank:
holds
cleaning solution.
13.
Recovery
tank
handle:
raise handle to unlock tank
for removal; lower handle for
ward to lock tank into posi-
tion.
Operate
deep
cleaner
only
at
voltage
specified
on
data
plate
on
back
of
cleaner.
Plug
deep
cleaner
into
a
properly
grounded
outlet.
ON/OFF pedal
&
Handle release pedal
Step on pedal (A) to turn deep cleaner
on. Step on pedal again to turn deep
cleaner off.
Step on pedal (B) to lower handle to
operating position. Handle does not lock
into a single position but “floats” to allow
convenient operation.
r0
transport
gLla:ing
mode
indi-
Indicator will show a green window next
to FLOOR (C) when handle is in the
operating position for cleaning carpet
rugs and bare floors.
To move your deep cleaner from room to
room put handle in upright and locked
position tilt deep cleaner back on
wheels and push forward.
Indicator will show a green window next
to TOOL (D) when handle is in the
upright position for tool use on stairs
upholstery etc.
Deep cleaner
automatically
diverts
suction
from
FLOOR
to
TOOL
when
handle is raised from the operating to
the upright position.