Filter
Top Products
Attach hose rack
Remove tool and taped screw from rack.
Insert projections on rack into slots on
back of cleaner.
Slide rack down into place. Insert screw
at (D) and tighten with a Phillips screw-
driver
Storing hose
&
tools
Store hose on rack by first positioning
hose in front section of clip.
Then continue wrapping hose as shown
snapping end of hose connector into
clip.
Position tool in holder at base of cleaner
and snap it into place as shown at
arrow.
Slide bare floor attachment into holder
as shown.
Powered hand tool
To remove powered hand tool (E), pull it
down and outward.
The powered hand tool is shipped in a
plastic bag for protection. Remove the
bag before using the tool by first open-
ing tool door.
To remove the scrub module (F), grasp
it at the sides and pull it forward.
To reposition the tool, reverse this
pro-
To reposition module, fit tabs in the stor-
cedure.
age area into holes on back of module.
Push module to snap it securely into
position.
This is the proper storage location for
the module.
How to reattach tool
cover
The tool cover is designed with a break-
away feature which allows it to snap free
if it is pushed open too far.
To reattach, align hinges of cover with
holes on sides of tool storage area.