Hoover Steam cleaner Carpet Cleaner User Manual


 
J
I
H
G
F
E
A
D
C
B
A
To use as a hand-
held steamer
5
3-7
Using the jet nozzle
The jet nozzle (A) is used to concen-
trate the steam spray to increase clean-
ing power. It can be used in small, hard
to reach spaces or where concentrated
steam is needed.
To attach the jet nozzle, turn steam
cleaner OFF and allow to cool. Align
the tab (B) on the nozzle with the slot (C)
on the front of the steam cleaner. Twist
the nozzle in a clockwise direction to
tighten. The tip of the nozzle should be
facing downward.
Twist counter clockwise to remove.
To begin cleaning, follow Figs. 3-5 & 3-6.
3-8
Using the brushes
To attach the brushes, turn steam
cleaner OFF and allow to cool.
The jet nozzle can be used by itself or
with one of the brushes attached.
All brushes attach in the same manner.
Slide end of brush (D) over tip of nozzle
(A). Twist slightly to tighten.
NOTE: The two purple brushes can be
used in the kitchen, while the white
brush can be reserved for use in the
bathroom (toilet seat, tile grout, etc.).
The triangular brush (E) can be used
for larger areas (walls, floors, screens).
The cloth (F) can be placed over the tri-
angular brush to aid drying, for more
even cleaning coverage and for cleaning
flat or painted surfaces.
3-9
Using the turbo
nozzle
The turbo nozzle (G) allows adjustment
for a narrower or wider spray, depending
on the area to be cleaned.
To attach the turbo nozzle, turn steam
cleaner OFF and allow to cool. Push
the nozzle straight into the hole (H) on
the front of the steam cleaner.
3-10
Pull the nozzle either out (I) for wider
steam flow or push in (J) for narrower
flow.
To begin cleaning, follow Figs. 3-5 & 3-6.
The turbo nozzle can be used on mirrors
or windows.
Continued
The steamer can be used as a hand-
held cleaner for various cleaning jobs
around the house. Use the following as a
guide for the various accessories and
recommended uses.
Turn cleaner OFF and unplug and
allow to cool before attaching or
removing any of the accessories.
NOTE: If using the steamer on waxed
surfaces, test in a hidden area to check
for effects on the wax.
3-11
CAUTION: Thermal shock can shatter
glass. Before cleaning cold glass sur-
faces, carefully warm the surface by
directing the steam jet on the glass
from a distance of no less then 4”-6”.