Filter
Top Products
* Certain Models Only
** May vary according to model
Power On
1.
The LCD screen will illuminate.2.
NOTE: If your robot is already switched On, but in standby mode, it can be activated from the remote control**
or pressing one of the touch sensitive keys.
1.
sserP .yad tcerroc eht woleb sraeppa enil eht litnu **lortnoC etomeR eht no worra nwod dna pu eht e
sU2.
3.
4.
Day and time are now set.5.
Cleaning Programs
Press the AUTO Sensitive touch control on the robot or press the AUTO button on the remote control to activate
ZIG ZAGEDGE ELLIPTICAL SQUARE
Press the SPOT Sensitive touch control on the robot or press the SPOT button on the remote control to activate
elliptical pattern, where the radius will continuously increase for approximately 3 minutes.
With the Remote Control**, you can also activated all the other cleaning programs:
Manual Navigation: The Robot can be controlled manually at any time during a cleaning program. The
With the dus
t sensor*, on dust detection the Robo.com² will automatically initiate a cleaning cycle and will
follow a square pattern.
navigation arrow keys in the remote control will move the Robot in the desired
be controlled up to a distance of 10m, even behind a wall.
Full & GO: When the robot is charging, press the FULL & GO button on the remote control to
Station.
TURBO*: Press the TURBO* button on the remote control to activate the TURBO* speed. The
faster speed, covering quicker the area to clean.
Scheduled Cleaning*:
a cleaning schedule follow see ‘Setting Up The Cleaning Schedule’.
GB
RoboCom2Manual2011__GB.indd 8 14/07/2011 13.40.05
DEMO
DEMO
S
E
N
S
I
T
I
V
E
T
O
U
C
H
C
O
N
T
R
O
L
S
DEMO
S
E
N
S
I
T
I
V
E
T
O
U
C
H
C
O
N
T
R
O
L
S
DEMO