Filter
Top Products
* Certain Models Only
** May vary according to model
Remote Control** Set Up
To install batteries see Cleaner Maintenance - Replacing the batteries.
Note: The Remote Control** can be used through walls because it works on radio waves not infrared.
Virtual Barrier* Set Up
To install batteries see Cleaner Maintenance - Replacing the batteries.
Remove any obstacles from the area that you want to block.t
t
Ensure the Virtual Barrier* is more than 3m away from the Charger Base Station.t
Position the Virtual Barrier* so that the infra red transmitter is pointing across the area you want to create 1.
the barrier.
Slide the toggle switc
h to the desired length of the barrier.2.
ICON BARRIER TYPE BARRIER LENGTH
0m
2m
Short 2m
4m
Medium 4m
6m
Long 6m
3.
NOTE: The battery power usage relates directly to the infra red level. For longer battery life chose the correct
length of infra red beam.
Barrier*.
50cm
GB
RoboCom2Manual2011__GB.indd 7 14/07/2011 13.40.01
R
DEMO
DEMO
Changing the Voice Language
Robo.com² is able to communicate in English, French, Italian or Spanish. The default language is English. To
change this:
1. Turn the Robo.com² on.
2. Press and hold the Voice Button for 5 seconds until you here the current language setting.
3. Press the Voice button a
gain until you hear the next language. Repeat this until you hear the desired
language setting.
4. Once selected the Robo.com² will change the settings. Do not press the remote control again.
NOTE: The language icon will appear for 5 seconds on the display.
Adjusting Robo,com² Voice Volume
1. Press the Voice button to select the desired volume. You can select Low, Medium or High or O.
2. The volume will appear on the display.
NOTE: The voicevolume will appear on the display. volume will appear for 5 seconds on the display.
DEMO
DEMO
LOWMEDIUM HIGH OFF
ENGLISH ITALIAN FRENCHSPANISH