Honeywell VISTA-10PSIA Home Security System User Manual


 
– 35 –
Event Logging Procedures (continued)
Event Logging Procedures (continued)Event Logging Procedures (continued)
Event Logging Procedures (continued)
Table of Event Log Codes
Table of Event Log CodesTable of Event Log Codes
Table of Event Log Codes
The following table lists the codes that may appear when viewing the Event Log.
If the event code is preceded by an “E” (as in the example display on the previous page), it
means that the event is new and ongoing; if preceded by an “R,” it means the event has been
restored.
Code Definition
110
Fire Alarm
121
Duress
122
Alarm, 24
-
hour Silent
123
Alarm, 24
-
hour Audible
131 Alarm, Perimeter
132 Alarm, Interior
134 Alarm, Entry/Exit
135 Alarm, Day/Night
143
Alarm, Expansion Module
145
ECP Module cover tamper
146
Silent Burglary
150
Alarm, 24
-
Hour Auxiliary/Monitor
zone
162
Carbon Monoxide
301
A
C Power
302
Low System Battery/Battery Test
Fail
305
System Reset (Log only)
321
Bell/Siren Trouble
333
Trouble, Expansion Mod.
Supervision
341
Trouble, ECP Cover Tamper
344
RF Receiver
Jam
351
Telco Line
Fault
353
Long Range Radio
Trouble
354 Failure to Communicate
373
Fire Loop Trouble
374
Exit Error Alarm
380
Global Trouble, Trouble
Day/Night
Code Definition
381
RF Supervision Trouble
382
Supervisio
n Auxiliary Wire Zone
383
RF Sensor Tamper
384
RF Sensor Low
-
battery
393
Clean Me
401
Disarmed, Armed AWAY,
Armed MAXIMUM
403
Schedule Arm/Disarm AWAY
406
Cancel by User
407
Remote Arm/Disarm
(Downloading)
408
Quick Arm AWAY
409
Keyswitch
Arm/Disarm AWAY
441
Disarmed/Armed
STAY/INSTANT,
Quick-Arm STAY/INSTANT
442
Keyswitch
Arm/Disarm STAY
455
Scheduled Arm Fail
459
Recent Closing (restore only)
570
Bypass
601
Manually Triggered Dialer Test
602
Periodic Te
st
606
AAV to Follow
607
Walk Test Entered/Exited
623
Event Log 80% Full
625
Real
-
Time Clock was Changed
(log only)
627
Program Mode Entry (log only)
628
Program Mode Exit (log only)
642
Latch Key (log only)
750
-
789
Reserved for Configurable Zone
Type report codes (check with
central station when using these
codes)