– 29 –
Paging Feature
Paging FeaturePaging Feature
Paging Feature
Manual Paging
Manual PagingManual Paging
Manual Paging
Your system may be set up so you can manually send a message to a pager.
• Your installer programs the paging function key and the pager phone number.
• Pressing the paging keys sends the message
9 9 9 – 9 9 9 9
to the pager.
• This message could mean “call home”, “call your office”, or any other prearranged
meaning.
• See the Paging chart at the back of this manual for details of the paging setup for your
system.
1. Hold
pager key
2 seconds.
Press and hold the programmed Paging Key for at
least 2 seconds (wait for beep).
2. The recipient, on seeing the 999–9999 message, will
understand the prearranged meaning of this signal.
Alpha Display:
DISARMED
READY TO ARM
Fixed-Word Display: READY
999-9999
Pager Display
Latch Key Paging
Latch Key PagingLatch Key Paging
Latch Key Paging
You can program a schedule that causes a pager report to be sent if the system is not
DISARMED by the scheduled time (see Scheduling section, event “03”). For example, a
working parent might want a message to be sent to a pager if their child did not arrive home
from school and disarm the system by a certain time.
If programmed, the message that is sent is:
7 7 7 – 7 7 7 7 .