Filter
Top Products
VisionPRO
TM
8000 Touchscreen Programmable Thermostat
68-0280—01 30
The remaining run time days can be viewed by pressing the
More key; the remaining days can be edited using the More
key or from the Installer Setup. To view or reset the reminder
before it expires, follow these steps using the More key:
1. Press the More key until the filter reminder appears on
the screen. This is the number of fan run-time days
remaining on the filter reminder.
2. Press the Edit key.
3. Use the Up and Down keys to change the number of
run-time days.
4. Press the Done key to go back to the viewing screen.
5. Press the Reset key to activate the new number of days
selected in the previous screen.
6. Press the Done key to return to the Home screen.
SCHED
SCHED
HOLD
HOLD
CLOCK SCREEN MORE
DONE
WAKE
LEAVE RETURN SLEEPEDIT CANCEL
MON
TUE WED THU FRI SAT SUN
RESET
CHANGE FILTER UV LAMP HUMIDIFIER PAD
DAYS
M22449
SCHED
SCHED
HOLD
HOLD
CLOCK SCREEN
DONE
WAKE
LEAVE RETURN SLEEP CANCEL
MON
TUE WED THU FRI SAT SUN
CHANGE FILTER UV LAMP HUMIDIFIER PAD
DAYS
M22450
SCHED
SCHED
HOLD
HOLD
CLOCK SCREEN MORE
DONE
WAKE
LEAVE RETURN SLEEPEDIT CANCEL
MON
TUE WED THU FRI SAT SUN
RESET
CHANGE FILTER UV LAMP HUMIDIFIER PAD
DAYS
M22449
SCHED
SCHED
HOLD
HOLD
CLOCK SCREEN MORE
DONE
WAKE
LEAVE RETURN SLEEPEDIT CANCEL
MON
TUE WED THU FRI SAT SUN
RESET
CHANGE FILTER UV LAMP HUMIDIFIER PAD
DAYS
M22451