Filter
Top Products
23 68-0076—1
STEP 3
COPYING THE PROGRAM TO
THE DESIRED DAYS
It is possible to copy the program for
one day to any other day or combina-
tion of days. The new program will
replace any program already set in the
day selected.
If necessary, press and release to enter the
programming mode.
Press and hold until the day containing the
program to be copied shows in the display.
Press and release. The day to be copied will
show, and the next day will flash, in the
display.
Press and release to copy the program into
the day that is flashing in the display. Note
that the next day now starts to flash.
Press and release if it is not desired to copy
into the day that is flashing. Note that the
next day now starts to flash.
Press and release the COPY TO key again
to select the day that is flashing, or the
DAY key to bypass it.
Continue until all desired days are showing
in the display and are not flashing.
If an error is made in copying, start over by
pressing COPY TO key repeatedly until all
days are shown (not flashing); press COPY
TO key once more.
Press and release to copy the program into
all the days selected.
STEP 4
SETTING THE SCHEDULES
AND TEMPERATURES FOR
THE REMAINING DAYS
Use the procedures described in Steps
2 and 3 and summarized in this step to
program the remaining days.
Press and release to enter the programming
mode.
Press and hold until the day desired to
program shows on the display.
If COOL shows on the display, press and
release to switch to HEAT.
Use the AHEAD/BACK keys to set the
time and the WARMER/COOLER keys to
set the heating temperature.
Press and release the PERIOD key to step
through the remaining time periods. Use the
AHEAD/BACK keys to set the time and the
WARMER/COOLER keys to set the heat-
ing temperature for each time period.
PERIOD
DAY
RUN
PROGRAM
PERIOD
DAY
DAY
AHEAD
BACK
PERIOD
WARMER
COOLER
WARMER
COOLER
AHEAD
BACK
M2724
SET
PT
PM
MON
NIGHT HEAT
M2724
SET
PT
PM
MON
NIGHT HEAT
M2725
TUE
MON
M2726
TUE WED
MON
M2727
WED
MON
M2728
WED THU
MON
M2729
PM
TUE
MIDDAY
M2731
SET
PT
FRI
MIDDAY HEAT
M2730
AM
SET
PT
TUE
MIDDAY HEAT
M2731
SET
PT
FRI
MIDDAY HEAT
T8611M
PROGRAMMING THE THERMOSTAT
COPY
FROM
COPY
TO
COPY
TO
SET
HEAT/COOL