Filter
Top Products
T8600D, T8601D AND T8602D CHRONOTHERM
®
IV DELUXE PROGRAMMABLE THERMOSTATS
68-0164—1
14
3. Press Copy.
M10326
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Copy
Mon
4. Press Day until the day to be copied to is displayed.
M10327
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time
Copy
Mon
Wed
5. Press Copy.
NOTE: donE will be displayed for two seconds and
then the normal program display will be
shown.
M10328
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Copy
6. Repeat steps 2 through 5 for all the days desired.
7. Press Run Program.
Clearing Program Period
NOTE: The thermostat must be in the program mode to use
the clear feature. Go to step 2 if the thermostat is
already in the program mode.
1. Press Wake, Leave, Return or Sleep.
M10329
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Heat
Auto
System Fan
Mon
AM
Leave
Set Program
Start Time
Setting
Heat
M10330
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time
Copy
Heat
Auto
System Fan
AM
Sat
Leave
Set Program
Start Time
Setting
Heat
M10331
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Heat
Sat
Leave
Set Program
Start Time
Setting
Leave
M10332
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Heat
Wake
Temporary Setting
2. Press Day until the desired day is displayed.
3. Press Leave, Return or Sleep until the start time and
temperature setting are cleared (approximately 3
seconds).
NOTE: Wake cannot be cleared.
4. Repeat steps 2 and 3 for all the periods to be cleared.
5. Press Run Program.
Setting Temporary Temperatures
Changing Temperature Setting Until the Next
Program Period
Press increase ▲ or decrease ▼ key until the desired
temperature setpoint is displayed.
NOTE: If ▼ or ▲ appear under the temperature display, it
means that both the heating and cooling setpoints
are being adjusted. Tapping the key will change both
the heat and cool setpoints by one degree. Press i
after the desired setpoint is reached to check the
setpoints.
NOTE: The temporary temperature setting is displayed for
approximately 3 seconds. The setting is canceled
when the next period starts or when Run Program is
pressed.
Changing Temperature Setting Indefinitely
1. Press Hold Temp.
M10333
Time Set Program
System Fan
Run
Program
Hold Temp
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Heat
Setting
2. Press increase ▲ or decrease ▼ key to change the
setting, if desired.
M10334
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Heat
Setting
3. Press Heat/Cool Settings to change between heat and
cool settings.
M10335
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Heat/Cool
Settings
Daylight
Time
Copy
Cool
Setting
4. Press increase ▲ or decrease ▼ key to adjust
temperature settings.
M10336
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Cool
Setting