Filter
Top Products
T8600D, T8601D AND T8602D CHRONOTHERM
®
IV DELUXE PROGRAMMABLE THERMOSTATS
68-0164—1
10
M10315
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Daylight
Time
Copy
AM
DST
Tue
Set Day/Time
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
M10316
Time Set Program
System Fan
Run
Program
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Auto
System Fan
Wake
Room
AM
DST
Tue
Heat
Aux Ht
Heat
Auto
System Fan
Off Auto
Wake
Mon
Wait
In
Room
Outdoor
%Humid
Auto
Sav
AM
PM
Hold for
Cool
Repl Batt
On
Recovery
DST
Cool
TueWedThuFriSatSun
LeaveReturnSleep
M10345
Set Program
Set Day/Time
Start Time
Temporary Setting Enrg
Em
Heat
Em Ht
INSTALLER SYSTEM TEST
Use the Installer System Test to check the thermostat operation.
Refer to Table 7 for a list of the available system tests.
To start the system test:
CAUTION
The minimum off time for compressors is bypassed
during the Installer System Test. Equipment damage
can occur if the compressor is cycled too quickly.
Press and hold the increase ▲ and ▼ decrease keys, at the
same time, until 10 appears. All segments of the display are
displayed for three seconds before 10 appears. See Fig. 10
and 11.
M10257A
TEST NUMBER
Fig. 10. Display of all the segments of the LCD.
Refer to Table 8 for the directions and results of the specific
tests.
NOTE: Press Time ▲▲ to advance to the next test and Time
▼▼ to go to the previous test. Press Run Program to
exit the system test.
Table 8. Installer System Test Options.
Fig. 11. Display of test number.
4. Press Run Program.
Table 7. Tests Available in Installer System Test.
Key to Press
Test
Number Description
Heating Equipment System Test
Time ▲ 10 Enter heating equipment system test.
▲ 11 Heat comes on. When Installer Setup number 2 is 1, the system fan is also energized.
▼ 10 Heat and system fan turn off.
Cooling Equipment System Test
Time ▲ 30 Change from heating to cooling equipment system test.
▲ 31 Cool and system fan come on.
▼ 30 Cool and system fan turn off.
Fan Equipment System Test
Time ▲ 40 Change from cooling to fan equipment system test.
▲ 41 Fan comes on.
▼ 40 Fan turns off.
Key Operation System Test
Time ▲ 60 2 Change from fan to key operation system test.
Test
Number System Test Description
10-19 Heating equipment can be turned on and off
30-39 Cooling equipment can be turned on and off
40-49 Fan equipment can be turned on and off
60 0 to
60 19
Keyboard keys test
70-79 Thermostat information including date code and
software versions are displayed