Honeywell LYNXR24 Home Security System User Manual


 
23
86(5)81&7,216
0HVVDJH5HFRUGLQJ3OD\EDFN9ROXPH&RQWURO
The LYNXR/LYNXR24 Message Center allows you to record, play and delete messages. The maximum
message duration is 85 seconds.
NOTES:
(1) The Record/playback functions can only be performed from the master keypad. It cannot be
performed from any other wireless keypad (ex. 5827).
(2) If the system loses electrical power, all messages will be erased.
(3) Message Play/Record will not be available if a report must be sent.
(4) Individual messages cannot be played back or deleted.
5HFRUGLQJD0HVVDJH
To record a message:
The keypad displays REC MESSAGE. Begin speaking into the microphone.
The recording will automatically stop after 85 seconds, if a message has been recorded. The keypad will
beep twice and REC will no longer be displayed. MESSAGE will still be displayed.
To stop recording before the end of 85 seconds:
The keypad beeps twice, the REC display turns off, but the MESSAGE display remains on.
Additional messages can be recorded, as long as there is recording time remaining, by repeating the
above steps.
NOTE:
If you are trying to record a new message and the message center is already full, the system
will announce END MESSAGE and REC MESSAGE will not be displayed. If the message
center is full all old messages must be deleted before new messages can be recorded. See
Deleting Messages section.
0HVVDJH3OD\EDFN
The lighted word MESSAGE indicates that a new message is in memory. After playing the message, the
MESSAGE display turns off. See NOTE below if using a wireless keypad.
To play back a message:
All recorded messages will be announced sequentially. A short beep will sound between messages.
To skip a message:
Deleting Messages
To delete all messages:
While the messages are being announced:
Press
A double beep will sound confirming that the messages have been deleted.