Filter
Top Products
To Modify Time
To Record the image of the visitor
Saving Image Function
1
2
3
4
Press [Door] + to go to SET UP MODE in
Time Modify.
Press to remove the cursor to the modify
position.
Press to increase the value, press to
decrease the value. After the time check, press to
remove the cursor to the position to modify.
To exit fromTime Setup Mode , press .
1
2
When the visitor is calling at entrance or pressing the
entrance monitor, press to start recording.
When Away Mode is set but the visitor calls at
entrance, it will record automatically.
The recorded image is in color style. When the
amount of the images is over 50 pieces, the 51st one
would cover the first one, the 52nd one would cover
the second one, so does the following one.
To Check the image
To Delete the image
1
2
Press [Door] + to display the
recorded image.
Press to display the next menu.
1
2
Press [Door] + to display the
recorded image.
Press to delete the all saved
images.
18 / Honeywell Co., Ltd.
2009.04.06 10:00:30
2009.04.06 10:00:30
2009.04.06 10:00:30
2009.04.06 10:00:30