Filter
Top Products
Security and Alarm Functions
Away Mode
Sleep (stay) Mode
※ Away Mode, You can activate the security system when leaving the house.
※ You can activate the security system when you are at home.
Press [Away].
1.
During setting, the away mode is not set if the security zone except the entrance door and living
room is breached (or sensed). The corresponding safety zone lamp then blinks, and the
message Security system is not activated. Please check and try again is displayed.
Press [Away].
" "
▶
Press .
2.
The Away lamp and Safety Zone lamp for monitoring are then lit.
Message: "Security system is activated."
Away warning sound of "toot-toot" is then heard.
When setting the away mode, the away status is transmitted to the guard post.
The system considers you an intruder if you do not leave the house while the away
warning alarm sounds. As a result, the security system is activated.
Press [Away].
1.
Press .
2.
The Stay lamp and Safety Zone lamp for monitoring are then lit.
Message: "Security system is activated."
3.
During setting, the Sleep mode is not set if the security zone is breached (or sensed). The
corresponding safety zone lamp then blinks, and the message Security system is not
activated. Please check and try again is displayed.
Press [Away].
"
"
▶
When setting the away mode, the away status is transmitted to the guard post.
When the sleep mode is activated, the living room is not monitored; thus enabling you to move
freely inside the house.
If you have a visitor or wish to go outside while the sleep mode is activated, you need to
deactivate the sleep mode first.
Caution
14 / Honeywell Co., Ltd.