Filter
Top Products
Deactivating the Emergency Alarm
You need to finish your call or monitoring first to deactivate the alarm while talking
on the phone or monitoring the entrance.
Testing the Alarm Sound
You can perform deactivating and resetting by pressing stop and return even
while the gas or fire alarm is activated (according to the laws and regulations on fire
prevention).
Security and Alarm Functions
To turn off the warning sound, press the stop button.
2.
Caution
If the gas leak or cause of fire is not removed completely, the alarm is activated again.
Enter the password.
1.
To deactivate the alarm completely, press the return button.
3.
In case of gas leak, close the gas valve, open the windows to allow ventilation, and
wait until the sensor lamp turns green. Do not turn on any electrical device.
Caution
Press the button.
1.
Press .
2.
Press for emergency, for fire, for gas, or for intrusion.
3.
The lamp then blinks, and the corresponding alarm sounds (in case of emergency,
however, only the lamp blinks).
4.
To turn off the warning sound, press stop .
5.
To terminate the test, press return .
6.
16 / Honeywell Co., Ltd.